Cleaning & Maintenance; Maintenance & Cleaning - Lacor 61682 Instrucciones De Uso Y Mantenimiento

1
4
CLEANING / MAINTENANCE
1.- Make sure the blender is disconnected from the electrical grid.
2.- Turn the accessory mounted on the blender body clockwise to remove it (PHOTO 1).
3.- Clean all the parts, except the body, with soap and water. Do not put these parts in the dish
washer.
NOTE:
Be careful while cleaning the blades (7). Do not touch the blades with your hands
because they are extremely sharp. Use a brush to clean them (PHOTO 2).
4.- Use only non-aggressive detergents or dish washing products for cleaning.
Never use strong detergents or solvents.
5.- Clean the blender body with a cloth because this part cannot be submerged.
6.- Use a cloth to dry all the parts for storage.
7.- Store the appliance away from any heat source and out of direct sunlight.
34
2
5
1
3
6
2