Mounting The Cisco Switch - Cisco 200 Serie Guia De Inicio Rapido

Welcome
Thank you for choosing the Cisco 200 Series 8-Port Smart Switch, a Cisco
Small Business network communications device. This device is designed
to be operational right out-of-the-box as a standard bridge. In the default
configuration, it will forward packets between connecting devices after
powered up.
Package Contents
• Cisco SG 200-08 or SG 200-08P Smart Switch.
• Power Adapter.
• This Quick Start Guide.
• Product CD.
This guide will familiarize you with the layout of the smart switch and
describe how to deploy the device in your network. For additional
information, see www.cisco.com/smb.

Mounting the Cisco Switch

1
There are two ways to mount the switch:
• Set the switch on a flat surface.
• Mount the switch on a wall
Do not deploy the device in a location where any of the following
conditions exist:
High Ambient Temperature—The ambient temperature must not
exceed 104 degrees Fahrenheit (40 degrees Centigrade).
Reduced Air Flow—Both side panels must be unobstructed to prevent
overheating.
Mechanical Overloading—The device should be level, stable, and
secure to prevent it from sliding or shifting out-of-position.
Circuit Overloading—Adding the device to the power outlet must not
overload that circuit.
2
All manuals and user guides at all-guides.com
200 Series 8-Port Smart Switches