Quick Start; Repeater Installation; Start Of The Product; Product Configuration - Gorgy Timing RADIO TIMING NETWORK TDF/DCF GPS AFNOR Modo De Empleo

2.2. QUICK START

This part contains information necessary to the installation of the Radio repeater.

2.2.1. Repeater installation

☛
The radio repeater is envisaged to be fixed on a wall (non metal area) with
☛
It is important that the antenna preserves a vertical position to ensure an

2.2.2. Start of the product

► Check that the repeater is connected on a 230VAC power supply source. The lumi-
nous scale on the front face gives an indication of the level of reception of received
information. This indicator can vary from 1 lit segment to 8 segments.
► The installation of the repeater must take account of this level of reception. Indeed
the repeatr is used to increase the zone of radio cover of the transmitter. It will be
placed at the place where it remains 3 or 4 lit segments. The frequency of reception
depends directly on the adjustment of the period of emission of the transmitter.

2.3. PRODUCT CONFIGURATION

CONFIGURATION OF THE TRANSMISSION PARAMETERS
22
All manuals and user guides at all-guides.com
a height from at least 1 meter from the ground.
optimal operation of the system..
☛
No configuration to be made on this product.
It is configured automatically.
2. RADIO TIMING REPEATER
MDE-RTnetwork-3076V1.2