Setup Instructions; Power Supply - SCALESON S110 Manual De Instrucciones

4. Commissioning

4.1 Setup instructions

Protect the device from shocks, vibrations, strong heat or cold, drafts, chemicals and moisture by
choosing a location where it will be installed.
Place the scale on a firm, free and horizontal surface.
f
Make sure that no cables or other objects are trapped under the scale.
f

4.2 Power supply

Power is supplied as standard via a mains adapter (6 V) or a 9 V block battery.
5. Operation
5.1 Power on
With the scale unloaded, press the ON/TARE button.
When 0 is displayed, the scale is ready to weigh.
5.2 Switching units
Press the MODE button to change the unit of measurement from kg/g to lb/oz.
5.3 Taring Function
Place an empty container on the platform and press the ON/TARE button. The display will return to
zero, resetting the weight of the container to zero.
Place the material or object to be weighed in the container The net weight is displayed.
To exit the tare mode, remove all weight from the scale. A negative weight will appear on the display.
Press the ON/TARE button to reset the display to zero and clear the weight of the container.
13