RS485
Select this option to access the following submenu:
CAM ID
ID DISPLAY
BAUDRATE
RETURN
Option
CAM ID
ID DISPLAY
BAUDRATE
RETURN
CAMERA MANAGEMENT WITH CONTROL KEYPAD
The camera can be remotely managed by any control keypad equipped with RS-485 interface (for ex. the
keypad 1092/693); in this case, the communication parameters must be manually configured via camera
menu (as above described), in order to match the keypad ones (ID, Protocol, Baud Rate).
From camera menu, that can be accessed by the control keypad, the user can perform all the
customizations, as described in this manual.
Use the following commands:
•
PRESET 95 to access to the Menu
•
the Joystick to scroll the Menu options and change their values
•
PRESET 95 or IRIS+ to enter or exit into/from the submenus
Note
For keypad specific functions and access commands, see the control keypad manual.
VERSION
Indicates the software version on this camera.
48
All manuals and user guides at all-guides.com
RS485
0
ON
9600
RET
Value
0 ÷ 255
Selecting this option, the camera shows the ID number on
ON
9600 ÷ 4800 ÷
2400 ÷ 38400 ÷
19200
RET
Description
Used to set the camera identification code.
the high right corner
Used to set baud rate.
This option allows to quit the menu.
DS1093-083