Cub Cadet CC 760 Manual Del Usuario página 20

Lubrication
WARNING!
inspecting, always disengage PTO, set parking
brake, stop engine and remove key if so equipped to
prevent unintended starting.
Pivot Points & Linkage
Lubricate all the pivot points on the drive system and lift linkage
at least once a season with light oil.
Rear Wheels
The rear wheels should be removed from the axles once a
season. Lubricate the axles and rim hubs well with an all-purpose
grease before reinstalling them.
Front Wheels
Each of the front wheel axles and casters is equipped with a
grease fitting. See Fig. 6-3. Lubricate with a No. 2 multi-purpose
grease applied with a grease gun after every 50 hours of mower
operation.
20 s 6 — M
ectiOn aintenance
Before lubricating, repairing, or
Figure 6-3
& a
djustMents
Deck Spindles
Grease fittings can be found on each deck spindle. See Fig. 6-4.
Lubricate with 251H EP grease or an equivalent No. 2 multi-
purpose lithium grease. Using a grease gun, apply two strokes
(minimum) or sufficient grease to the spindle shaft.
Figure 6-4