HP J1473A Manual Del Propietário página 27

Editing Port Names and Addresses
1. Highlight the port you wish to change in the main OSD Window.
2. Press the Ctrl key twice to access the Command Menu or press the F2 key once.
3. Select 'Edit Port' from the Command Menu.
4. Enter the new port name, address, ID Dwell time and Scan Dwell time. Press
5. After selecting "ID Setup", use the arrow keys, position the ID window to where
6. Select "Save Changes" and press Enter to accept.
Press Esc at any point to exit this operation without saving the changes.
Deleting an Existing Port
1. Highlight the port you wish to delete in the main OSD Window.
2. Press the Ctrl key twice to access the Command Menu or simply press the
3. Choose the 'Delete Port' option.
4. Type Y or N at the prompt to confi rm the deletion and press Enter.
www.hp.com/racksolutions
All manuals and user guides at all-guides.com
(If you press F2 skip Step 3)
Enter to accept.
you would like it to appear when this port is selected. Then press Enter. (For
further information see 'The ID Window' later in this chapter.)
DELETE key. (If you press DELETE skip Step 3)
On-Screen Display Operations
21