B: Flash Upgrading - HP J1473A Manual Del Propietário

Rackmount Console Switch Owner's Manual
B: FLASH
Upgrading
Hardware/Software Requirements:
• Rackmount console switch
• Serial host system (i.e. laptop or desktop computer)
• 9-pin straight pass non-null modem serial cable (RS-232)
• HyperTerminal or other terminal emulation software (HyperTerminal is
• FLASH code fi le (downloaded fi rmware revision)
To upgrade the FLASH code on your Rackmount Console Switch, you will fi rst need
to determine if your unit is running A or B revision code. To do this, select the menu
choice 'Version Information' from the Command menu. The fi rst letter of the
revision code displayed will determine if your unit uses the A or B code.
Hewlett Packard Console Switch
Administrator Command Menu
Add Port
Edit Port
Delete Port
Administrative Functions
Scanning is OFF
Reset Standard Mse/Kbd
Reset Wheel Mse/Kbd
Version Information
ENTER = activate ESC = exit
You will next need to obtain the latest FLASH firmware revision from
Hewlett-Packard. It is available through the Hewlett-Packard web site at
www.hp.com/go/enclosures.
34
All manuals and user guides at all-guides.com
included with MS Windows 95, 98, NT, and 2000)
Hewlett Packard Console Switch
Version Information
Firmware Version
Press ESC to exit
A Rev Code
Hewlett Packard Console Switch
Version Information
A06 Firmware Version
Press ESC to exit
www.hp.com/racksolutions
B10
B Rev Code