Functional Description; Assembly; Attaching Auxiliary Handle; Attaching Backing Pad - Kawasaki 691391 Manual De Instrucciones

FUNCTIONAL DESCRIPTION

3
1
8
2
10
11
CONTROLS AND COMPONENTS:
1. Spindle Lock Button
2. Spindle
3. Motor Housing
4. Speed Adjustment Control
5. Lock On Switch
6. Power Cord
7. On/Off Switch
8. Brush Holder Cover
9. Locking Nut
10. Backing Pads (2)

ASSEMBLY

To avoid injury always make sure the sander/polisher is
unplugged before attaching the auxiliary handle.
All manuals and user guides at all-guides.com
4
5
7
9
12
13
ACCESSORIES:
11. Pin Spanner
12. Auxiliary Handle
13. Sanding Discs (2)
14. Wool Bonnet
9
This tool comes with an auxiliary handle which can be
attached to either side of the Sander/Polisher, depending
on the preference of the operator. This handle is necessary
to maintain complete control of the tool and should be
6
used at all times. Make sure this handle is always fastened
securely.
WARNING
14
ed speed rating on accessories. Never run a wheel or brush over the rated
speed. Accessories exceeding the recommended speed may fly apart and cause
serious personal injury.
• Press the spindle lock firm and insure there is no movement in the spindle.
Then while the spindle lock is depressed tighten the locking nut in a clockwise
direction using the pin spanner.
• Allow the Sander/Polisher to run in idle for at least a minute with the backing
pad correctly assembled.

ATTACHING AUXILIARY HANDLE

ATTACHING BACKING PAD

Always check the tool warning label for the recommend-
Hubbed wheels do not require mounting flanges.
• Place the backing washer over the
spindle making sure the fit is tight.
• Place the backing pad on the top of the
backing washer ensuring the bore fits
into the step of the flange.
• Mount the concave recess side of the
locking nut over the spindle.
10