TO ACTIVATE AND DEACTIVATE
THE ALARMS:
■ Press the Alarm button on the speaker until
the alarm you wish to activate is illuminated.
■ When the alarm is not illuminated,
it is deactivated.
To set the alarm:
■ Press the Alarm button on the speaker until
the alarm you wish to activate is illuminated.
■ Press and hold the Alarm button until the
hour digits begin flashing.
■ Turn the SNOOZE / SET button to adjust the
hour. Now press the SNOOZE / SET button
to save.
■ The minute display will now begin to flash.
Turn the SNOOZE / SET button to adjust the
minutes. Now Press the SNOOZE / SET
button to save.
■ The days of the week will start flashing. Turn
the SNOOZE / SET button to adjust between
weekends, weekdays or all week. Press the
SNOOZE / SET button to save.
■ Turn the SET button to scan through alarm
modes – iPod, FM or buzzer. Press the
SNOOZE / SET button to save.
■ Turn the SNOOZE / SET button once again to
adjust the volume level. Press the SNOOZE /
SET button to save.
PG533_HouseParty_Rise_2_Wireless_Manual_V1.6.indd 5
Sleep / snooze functions:
SNOOZE
■ When the alarm sounds, press the
SNOOZE / SET button on the speaker.
The alarm will repeat after 10 minutes.
■ Press
to stop the alarm for that day.
■ If no buttons are pressed, the alarm will ring
continuously for 1 hour.
SLEEP
The sleep timer switches the unit off
automatically after a set interval.
■ To activate the sleep timer, press the
SNOOZE / SET button.
■ Turn the SNOOZE / SET button to cycle
through OFF, 10min, 20, 30...60. Press
SNOOZE / SET to confirm the Sleep Timer.
This is the time after which your speaker will
turn off.
■ To turn off the sleep timer, repeat the above
steps and rotate to OFF.
Note: When setting the above functions, the
speaker will return to its previous display after
5 seconds of no activity.
Factory reset:
■ To restore the speaker to its factory settings
press and hold the power button ( ) for about
20 seconds.
User Manual | HouseParty Rise 2 Wireless | GEAR4
5
27/07/2012 11:16