Electrical Connection - Oster OS-CF11002WE Manual De Instrucciones

POSITIONING
Install this appliance at a location where the ambient temperature corre-
sponds to the climate class indicated on the rating plate of the appliance:
LOCATION
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the appli-
ance is positioned below an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit must be at least 100 mm.
Ideally, however, the appliance should not be positioned below overhanging
wall units. Accurate leveling is ensured by one or more adjustable feet at
the base of the cabinet.
WARNING! It must be possible to disconnect the appliance from
the main power supply; therefore, the plug must have easy ac-
cess after installation.

ELECTRICAL CONNECTION

Before plugging in, ensure that the voltage and frequency shown on the
rating plate correspond to your domestic power supply. The appliance must
be earthed. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current regulations, con-
VXOWLQJ D TXDOL¿HG HOHFWULFLDQ
The manufacturer declines all responsibility if the above safety precautions
are not observed.
This appliance complies with the E.E.C. Directives.
Climate class
SN
N
ST
T
Ambient temperature
+1 0C to +3 2C
+1 6C to +3 2C
+1 6C to +3 8C
+1 6C to +4 3C
English-9