Wash options*
The OPTIONS may only be set, modified or reset
after the wash cycle has been selected and before
the Start/Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not com-
patible with the selected was cycle (see Table of wash
cycles), the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with an-
other option or wash cycle selected previously, the in-
compatible option light will flash 3 times and switches
off, while the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
or 9
The Delayed Start function cannot be set once the
wash has already started.
All manuals and user guides at all-guides.com
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HAL.
LOAD button: the indicator light will illuminate.
cycle: Rapid wash.
3, 6
*
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
This option is incompatible with the following wash
A
Table of
Delayed
options
Start
1. Intensive
Yes
2. Normal
Yes
3. Daily 60'
Yes
4. Soak
Yes
5. Eco
Yes
6. Rapid
Yes
7. Crystal
Yes
EN
B
Half
Load
Yes
Yes
Yes
Yes
Yes
No
Yes
7