Emmaljunga City Carrycot Manual De Instrucciones página 20

Assembly and usage of the
City Carrycot
1
2
"Klick" "Klick"
1
2
2
2
3
1
3
2
1
5
4
5
20
All manuals and user guides at all-guides.com
Assembly of pram body
• Remove plastic covers from mattress, fabrics and discard. The bot-
tom of the City carrycot is made out of wood (picture). The City
carrycot Supreme has a Thermobase bottom (no picture)
WARNING
• Risk of suffocation. Do not let your children play with the plastic
1
bag.
• In order to rise the pram body, pull the metal bar along the bottom
until it clicks into one of the plastic parts.
• Pull one side of each metal bar in position (1) and then the other side
(2) so that both sides clicks into the plastic parts (3).
• Repeat the same steps with the metal bar on the other side of the
pram body.
WARNING
• Before using the pram body, make sure that the metal bars have
clicked into all four plastic parts (3) so that the frame of the
pram body is held firmly in place.
4
Folding the pram body
• Lift the mattress.
• Push down the button on the plastic part (4).
• Pull the metal bar past the button (5).
• Repeat same steps on all four sides on the pram body.
• Pull the metal bars along the bottom and fold the pram body.
When using the Exclusive mattress (accessories)
• The exclusive mattress consists of a combination of fibre filling
and polyeter filling. Make sure that you place the mattress with the
firmer polyeter filling facing downwards in the carrycot.
• Do not place any additional mattresses in the carrycot / pram body.
Only use the original Emmaljunga mattress that is included with the
product or the Emmaljunga Exclusive mattress (accessories) .
Attach the hood
• Attach the hood to the pram body by pushing the plastic leg of the
hood into the plastic holders on the pram body. Make sure they
snap into place.
Manual City Carrycot v. 3.5