Specifications - Panasonic SC-HTE180 Instrucciones De Funcionamiento

Specifications

█
Amplifier section
RMS output power: Dolby Digital mode
30 W per channel (6 Ω), 1 kHz, 10% THD
Front Ch
Subwoofer Ch
60 W per channel (3 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power
█
Terminals section
HDAVI Control
This unit supports "HDAVI Control 5" function
HDMI AV input
Input connector
HDMI AV output
Output connector
Digital audio input
Optical digital input
Sampling frequency
Audio format
Dolby Digital, DTS Digital Surround, LPCM
Analog audio input
Audio input
USB port
█
®
Bluetooth section
Version
Class
Supported profiles
Operating frequency
Operation distance
14
14
120 W
Type A (19 pin)
Type A (19 pin)
Optical terminal
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Pin jack (1 system)
For service use only
Bluetooth Ver. 3.0
®
Class 2
A2DP
2402 MHz to 2480 MHz
10 m line of sight
█
Speaker section
Front speaker (built-in)
Type 1 way, 1 speaker system (bass reflex)
Speaker unit(s)
Full range
Subwoofer (built-in)
Type 1 way, 2 speaker system (bass reflex)
Speaker unit(s)
Woofer
█
General
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Maximum loading weight
Operating temperature range
Operating humidity range
20% to 80% RH (no condensation)
Power consumption in standby mode
(With "BLUETOOTH STANDBY" set to "OFF")
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyzer.
3.8 cm x 9 cm cone type x 2
8 cm cone type x 2
AC 220 V to 240 V, 50 Hz
27 W
700 mm x 60 mm x 365 mm
4.5 kg
50 kg
0°C to +40°C
0.25 W (approximate)