Publicidad
3
Carefully snap four more connectors onto the newly
formed corners of this cube as shown.
5
Continue building cubes by inserting grids into open
slots, then attaching at the open corners with more
connectors.
6
If you decide to create a four cube set using the
extra grids as shelves and dividers, then snap two
C Plastic Clips onto two opposite ends of a grid,
ensuring that the clips are near the corners.
5279-37: 2 of 2; 02/00
Completed
five-cube configuration
C
Safco Products Company, New Hope, MN 55428
4
Turn the cube so the open end is the front of the
cube. Snap two more connectors onto a new wire
grid. Begin building the walls of the next cube by
inserting the new grid into the existing open
connectors.
7
Position the grid inside the cube. Snap the open
ends of each plastic clip onto the inner wires of the
cube walls.
PLASTIC CLIP
Completed
four-cube configuration
Publicidad
