Self Help
Dishwashers may occasionally exhibit problems that are unrelated to a malfunction o
may help you with a dishwasher problem without involving a repair professional.
Problem
Dishwasher
1.
Door may not be properly latched.
2.
Unit may not be turned on.
does not start
3.
Unit not reset or previous cycle not completed.
4.
Delay start engaged.
5.
Interruption of electrical power supply to dishwasher or blown
fuse.
6.
Child lock activated (select models).
The door may have been closed without irst selecting a cycle.
Dishes are not
1.
Rinse agent dispenser is empty. (Rinse agent indicator is
getting dry
activated).
enough
2.
Improper loading of dishes.
3.
Selected cycle does not include drying.
Note: Plastic or Telon do not typically dry as completely as other
18
All manuals and user guides at all-guides.com
Cause
f the dishwasher itself. The following information
Action
To reset, refer to "Canceling or changing the cycle" section in
To reset, refer to "Delay Start" section in this manual.
Deactivate the child lock. Refer to "Child Lock" section in this
To adjust the volume or deactivate, refer to "Cycle Completion
Signal" section in this manual.
Remove the spray arms and clean according to "Check/Clean
the Spray Arm Nozzles" in Care and Maintenance section of this
ness. Refer to Table under "Adding Detergent and Rinse Agent".
Clean the ilter. Refer to "Check/Clean the Filter System" under
dishwasher. See also "Preparing and Loading" section of this
Refer to "Wash Cycle" section in Operating the Dishwasher sec
the "Preparing and Loading" section of this manual.
Remove the ilters and clean according to the "Check/Clean the
Filter System" section of this manual.
Refer to "Clean the Door Gasket and Door Seal" in the Care and
Refer to the "Canceling or changing the cycle" section of this
ied personnel.
lushes and interrupt the cycle and place an 8 oz. cup of distilled
white vinegar solution on the top rack and then inish the cycle.