Preventive Maintenance; Environmental Guidelines And Recommendations; Warranty - Schulz ST570 Manual De Instrucciones

6. PREVENTIVE MAINTENANCE

Maintenance and cleaning:
Before performing any cleaning or maintenance, unplug the tool from the power grid;
After use, clean the tool with a damp cloth (do not pour water on the tool) and store it in a clean, dry place
protected from moisture and dust. Keep your tool out of reach of children and people unfamiliar with the use of
the equipment.
Transportation:
Do not pull or carry the tool by the electric cord or allow its contact with edges, sharp elements, rough surfaces,
oil or chemicals that may damage its flexible and insulating properties;
Do not move the tool with the trigger locked in the "on" position;
Repairs:
If required to perform any repair or replacement of the electric motor brushes, contact the nearest Schulz assis-
tance. Original parts Schulz must be used. The use of non-original parts results in warranty loss and may cause
damage to the equipment or injury.

ENVIRONMENTAL GUIDELINES AND RECOMMENDATIONS

7.
1. Wastewater Disposal
The presence of untreated wastewater into rivers, lakes or other water receiving bodies may adversely affect
marine life and water quality.
Schulz Compressores S.A. recommends correct treatment of wastewater through processes that ensure envi-
ronmental protection and healthy quality of life in compliance with the regulatory requirements of the current
legislation.
2. Disposal of Solid Waste (large parts and product packaging)
The generation of solid waste is one aspect that must be considered by the user, in the use and the maintenance
of the equipment. The impacts caused in the environment may cause significant changes in the soil quality, water
quality in surface and subsoil and the health of the population, through improper waste disposal (on streets,
water receiving bodies, landfills or plots, etc). Schulz Compressores S.A. recommends the management of the
waste derived from the product from its generation, handling, and treatment to its final disposal. A suitable
management should consider the following stages: quantification, qualification, classification, source reduction,
collection and selective collection, recycling, storage, transportation treatment and final destination. Waste
disposal should be done in compliance to regulatory requirements of current legislation.

8. WARRANTY

Schulz Compressores S.A.,within the limits stated by this Term, assures the first buyer the warranty against
workmanship defect for a period of one year (including the statutory warranty-period – first 90 (ninety) days),
counted from the issue date of the invoice.
WARRANTY GENERAL CONDITIONS
A. Warranty service will only be performed upon presentation of the original invoice.
B. Any warranty service must be performed only by SCHULZ SERVICE PROVIDER.
C. If the owner of this model (portable product) wishes to be visited at home, a visit fee may be charged by
SCHULZ SERVICE PROVIDER.
All manuals and user guides at all-guides.com
28