Bebecar MINIBOB EasyLock Manual De Instrucciones página 9

GB
IMPORTANT - READ THE INSTRUCTIONS
CAREFULLY BEFORE USE AND KEEP
THEM FOR FUTURE REFERENCE
REMEMBER YOUR CHILD'S SAFETY IS YOUR RESPONSIBILITY
WARNING: This carrycot has been designed to be operated as shown in the
instructions supplied.
Not to do so may cause damage and render your guarantee void.
A - Remove the apron and mattress from the carrycot and pivot the metal formers
towards the upright position.
B - Fit the mattress and liner as shown.
NB: The mattress liner makes part of the carrycot, so never use the carrycot
without it.
C - The carrycot backrest can be raised or lowered by adjusting the metal support
behind it.
D - To fit the hood, insert bayonet fitting into slots of the carrycot.
E - To remove the hood, press on the outside edge of the carrycot at the position of
the bayonet.
F - Integrated and adjustable air ventilation base system providing the baby with a
natural well-being when reposing in the carrycot.
G - To fully open the hood, press down on levers in side pocket of hood.
H - To stabilize the carrycot base pull out the four plastic feet located in the corners of
the carrycot base.
To enable the rocking feature push the four feet into the carrycot base.
I - TO FIT CARRYCOT: Place carrycot base on chassis attachment device
"easylock". Lock will automatically engage.
Warning: Check that the pram body attachment devices are correctly engaged
before use.
J - TO REMOVE CARRYCOT: Push in button on base of the carrycot and
simultaneously lift carrycot away from chassis frame.
The carrycot can be transported in the rear seat of the car, when using the
Kit SN 5259 according to the requirements of ECE-R44-04.