Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Ninja BL820 Guia Del Usuario

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe
dry.
3 Place the pitcher, bowl and single serve cup in the
dishwasher. Place the lids and attachments on
the top rack. Use caution when handling the
blade assemblies as the blades are very sharp.
Always hold the top blades and chopping
blades by the shaft.
NOTE: You may also wash the containers by
filling ¾ of the container with warm water and a
drop of dish washing detergent, placing the lid or
single serve blade assembly on and pressing the
pulse button a few times. Once clean, remove the
container from the motor base. Rinse the pitcher,
bowl, single serve cup and lids under running
water. Allow all the parts to dry before storing.
Please call customer service if any servicing needs
to be performed on the appliance at
1-877-646-5288.
All manuals and user guides at all-guides.com
HOW TO STORE
1 Store the Ninja Ultima
™
pitcher on the motor base, top blades inside the
pitcher and lid on the pitcher. Store the chopping
blade in the 64 oz. bowl with the lid on the bowl.
Store the discs and dough blade in a secure
location.

RESETTING THE MOTOR THERMOSTAT

The Ninja Ultima System features a unique safety
™
system which prevents damage to the unit's
motor and drive system should you inadvertently
overload your appliance. If the appliance is being
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 If using the top blades or the chopping blades,
carefully remove them by the shaft, ensuring that
no food is jamming the top or bottom cutting
blades.
CAUTION: The blades are extremely sharp -
handle with care! Always hold the top blades
and chopping blades by the shaft.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base, carefully
re-insert the top blades (if using) and re-plug the
appliance into the electrical outlet.
NOTE: Ensure that the blades are seated properly
by standing the blades upright in the jar. If the
blades are not seated properly on the star-shaped
post, carefully check the underside of the top blade
assembly to ensure there's no food in the way.
Rinse if necessary. Do not operate if the top blades
are not upright at any time.
5 Proceed to use the appliance as before, making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com
System upright with the
21