Mounting Instruction For Shut-Off Valve For Test Connection And; Fine Adjustment Valve - WIKA CPP1000-M Manual De Instrucciones

Hand Spindle Pump
CPP1000-M/-L
6. Mounting instruction for shut-off valve for test connec-
GB
tion and fine adjustment valve
The mounting instruction describes the subse-
quent mounting of the shut-off valve for test
connection (Order No. 11208384) or of the fine
adjustment valve (Order No. 11248351). The
valves can be mounted at the side of the back
flange in exchange for the blind plugs which are
installed as standard.
The following combinations are possible for the individual pump versions.
If only one instrument (reference gauge or test item) with large volume is mounted on
the CPP1000-M, only one shut-off valve for test connection is needed. If both gauges
(reference and test item) have large volumes, the usage of two shut-off valves is
recommended.
When 2 shut-off valves are used, it is not possible to mount a fine adjustment valve.
16
Shut-off valve for test
connection
1
0
1
2
Shut-off valve for test
connection
1
0

Fine adjustment valve

with 0
with 1
with 1
with 0
Fine adjustment valve
with installed as standard
with installed as standard
WIKA Operating Instructions Hand Spindle Pump