Use And Operation - Asist AE3M30SDS-BMC Guia Del Usuario

13 - SDS quick-release chuck
14 - Vibration frequency control
Accessories
1x semicircular cutting disc
1x cutting attachment with straight blade
1x scraper
1x Allen key
1x delta sanding plate for attaching sanding sheets
6x triangular sandpapers
Pictograms
Pictograms on the product packaging:
a) Power supply values
b) Power consumption
c) Idle speed

USE AND OPERATION

ASIST tools are intended for home or hobby use only.
The manufacturer and importer do not recommend
using this tool in extreme conditions and under high
loads.
Any additional requirements must be the subject of
an agreement between the manufacturer and the
customer.
The oscillating grinder is a multifunctional tool versa-
tile DIY tool. Ideal for grinding details, removing grout,
scraping, cutting PVC pipes, cutting skirting boards,
plasterboard.
Choose the speed you need for a specifi c material,
work with an optional speed option that gives you
more control while working.
Multi-position mounting of accessories will make it
easier for you to work in hard-to-reach places with
higher accuracy.
The SDS quick-release chuck helps to change the
working element without additional tools in a minimum
of time.
Comfortable soft grip allows safe and pleasant work.
Work light to brighten the work area when cutting in
poor lighting conditions.
IInstallation of sandpaper (C)
The tool uses velcro sanding paper, which is fi rmly
attached to the support pad with adequate pressure.
For replacement, simply separate the old sandpaper,
remove the dust from the backing pad and press the
new sandpaper into place (Fig. C).
After prolonged use, the surface of the support pad
will abrade and must be replaced if it no longer of-
fers a fi rm grip. If the front of the backing pad wears
prematurely, reduce pressure on the tool during
operation.
It also includes a dust extraction device designed for
installation without additional tools and, in addition,
with a convenient dust extraction adapter.
Choice of application accessories
Accessories Material
Segment saw Wooden
blade 50CrV materials,
not included plastic,
non-
ferrous
metals
Plunge saw Wooden
blade HCS, materials,
wood soft
plastics
Abrasive pad Wooden
materials,
metal
materials
Scraper Metals,
wood,
plastic
Switching on and off
Switch on the tool with the slide switch located on the
top of the motor cover
Switching on:
TO SWITCH ON THE TOOL, slide the switch forward
to the „I" position.
Shutdown:
TO SWITCH OFF THE TOOL, slide the switch back
to the „0" position.
WARNING! Hold the tool with both hands when
lowering, as motor torque can cause the tool to rotate.
49
Application
Separating and plunge cuts,
as well as for cutting close
to the edges, in corners and
hard-to-reach places, for
example shortening already
installed bottom rails or
door hinges, plunge cuts for
adapting fl oor panels.
Cutting saw blade, wood
Wooden materials, soft
plastics
Separation and deep plunge
cuts, as well as for cutting
close to the edges, in corners
and hard-to-reach places,
for example: narrow plunge
cut in solid wood for the
installation of a ventilation
grille.
For face grinding and
planing of small irregularities,
supplied with sandpaper
Scraping old varnishes or
adhesives. Removal of glued
carpets, e.g.