Proper Use Of The Unit - Mach Power HC-IRDFT02 Guía De Uso

All manuals and user guides at all-guides.com
Note: The Body Mode is used to measure the forehead temperature, then
the Object Mode is used to measure the object temperature.
2. Unit setting
Long press SET button when power on after you hear 1 beep, the screen will
display °C or °F, Mode will change between °C and °F .when the SET button is
pressed.It will confirm the Celsius Unit automatically when you switch to °C,
and confirm the Fahrenheit Unit automatically when you switch to °F. Then
Mode setting is finished.

Proper Use of the Unit

Pre-measurement
About Normal Body Temperature&Fever
The temperature in the forehead and temple area differs from the internal
temperature, which is taken orally or rectally. Vasoconstriction, an effect
which constricts the blood vessels and cools the skin, can occur during the
early stages of a fever.In this case, the temperature measured by the Infrared
thermometer may be unusually low. If the measurement therefore does not
match the patient's own perception or is unusually low, re peat the measu-
rement every 15 minutes. As a reference, you can also measure the internal
body temperature using a conventional oral or rectal thermometer.
Body temperature can vary from one individual/person to next.
It also varies by location on the body and time of day. Below shows the
statistical normal ranges from different sites.
Please keep in mind that temperatures measured from different sites, even
at the same time, should not be directly compared. Fever indicates that the
body temperature is higher than normal. This symptom may be caused by
infection, overdressing or immunization. Some people may not experience
fever even when they are ill.
These include, but are not limited to, infants younger than 3 months old,
10