Mach Power HC-IRDFT02 Guía De Uso página 16

eng
All manuals and user guides at all-guides.com
Memory-recall of measurements
This Non-contact forehead thermometer automatically stores 20 sets
measure- ments value, the oldest record will be replaced by the latest mea-
surement value when more than 20 sets.
Read memory record
Press the MEM Button to enter the memory mode when power off. Each
time you press the MEM button, a number (from 1 to 20) will be displayed
along with the symbol , 1 second later, the measurement will be shown,
as well as subse- quent measurements can be display one after the other by
pressing the MEM Button each time.
Note:
The reading number "1" is the latest measurement, "20" is the oldest measu-
rement. When the oldest measurement is read, pressing the MEM Button
again will read the reading "1" again.
Memory-clear Of Measurements
If you are sure that you want to remove all stored
memo- ries permanently. Long press the MEM But-
ton for 8 seconds until CLr appears when power off,
CLr will flashes for 3 times to clear all the memories
along with 3 short beeps.
13