Sony SU-W110 Manual De Instrucciones página 12

Step 6: Secure the TV
to the wall
Before installing the TV, check the level
and angle of the lip of bracket A. The lip
should meet the body of bracket A at a
90 degrees angle (see page 13).
Otherwise, you cannot set the TV angle
to straight up.
1 Hook bracket B on bracket A.
Bracket B
Notes
• Secure the TV to the wall without
the rear cover.
• Hold the TV firmly. Be especially
careful when you secure the TV in a
high place.
12
(GB)
Bracket A
Wall
Bracket B
Bracket A
Align the screw holes on
2
bracket B with those on
bracket A, and fully tighten the
two supplied screws using a
coin, etc.
Bottom view
Supplied screws
Note
To prevent the TV being dropped,
hold it firmly as illustrated and
tighten the screws.
Wall
Bracket A