Handling Instruction - HiTi Digital M610 Manual Del Usuario

Handling Instruction

When handling the printer, please pay attention to the followings;
Lift the printer from its box and put it onto a flat and firm table or desk.
When moving the printer, hold the bottom edge of the printer.
In the case of dropping the printer during transportation, contact HiTi dealers or service
center for inspection of the printer. Using the printer with possible damage without proper
inspection may cause fire or electric shock.
Do not dismantle or remodel the printer. Some sections of the printer contain a high
voltage or become very hot. Ignoring this warning may cause electric shock, fire, or burns.
Please make sure the power is off and the power cord is removed from the printer before
transportation.
Please take caution when transporting the printer on the slippery floor.
Secure the power cable firmly while using.
The thermal head reaches high temperature during operation but it is normal. Do not
touch the thermal head by any case. Touch the thermal head may cause personal injury or
damage of the printer.
Touching the surface of the thermal head directly may cause damage to the thermal head.
Hard object getting into the printer may also cause the damage to the printer mechanism.
In such case, please do not use the printer while any obstacle inside the printer.
Do not attempt to service the printer beyond the instruction specified in this document.
In case of irrecoverable problem, please contact HiTi dealers or service center.
All manuals and user guides at all-guides.com
1 - 2
HiTi M610 User Manual
English