Loading Paper - HiTi Digital M610 Manual Del Usuario

Loading Paper

1. Turn on the power.
2. Pull the lever to open the front cover.
3. Install the paper flanges in the paper
roll while holding down the knob on
the paper flanges.
CAUTION: The paper is not set
correctly if there is a gap of about
10mm between the paper flanges
and paper roll.
All manuals and user guides at all-guides.com
2 - 4
HiTi M610 User Manual
4. Set the paper roll to the printer.
After setting the paper roll, remove the
seal from the paper and load the paper
roll as below.
5. Insert the edge of paper under the guide
roller by rotating the paper flanges. It is
ready when the PAPERSET LED turns to
blue.
CAUTION: The paper roll is not set
correctly if the PAPERSET LED is
blinking in red.
English