Tips And Recommendations For Use; Technical Data - SOMFY Sunea 50 CSI io Manual

The sun function is inactive until the up, sown or wind appearance operations have returned
the motor to standard operating mode.

3.8. TIPS AND RECOMMENDATIONS FOR USE

3.8.1. Questions about the Sunea CSI io?
Observations
The motorised product
does not operate.
If the motorised product still does not work, contact a drive and home automation professional.
3.8.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.

4. TECHNICAL DATA

Power supply
Radio frequency
Frequency bands and maximum power used:
Operating temperature
Index protection rating
Safety level
As the manufacturer, SOMFY ACTIVITES SA, F-74300 CLUSES hereby declares that the drive covered by these
instructions, when marked for input voltage 230 V~50 Hz and used as intended according to these instructions, is in
compliance with the essential requirements of the applicable European Directives, in particular the Machinery Directive
2006/42/EC and the Radio Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at www.somfy.com/ce.
Copyright © 2014- 2020 Somfy Activités SA, Société Anonyme. All rights reserved.
-
Possible causes
The control point battery is low.
The drive is in thermal protection
mode.
Solutions
Check whether the battery is low and replace it
if necessary.
Wait for the drive to cool down.
230 V ~ 50 Hz
868-870 MHz io-homecontrol
868.000 MHz - 868.600 MHz e.r.p. < 25 mW
868.700 MHz - 869.200 MHz e.r.p. < 25 mW
869.700 MHz - 870.000 MHz e.r.p. < 25 mW
- 20°C to + 70°C
IP 44
Class I
Images not contractually binding
EN
two-way tri-band.
®
23