Publicidad
18
18
AA
2
3
MM
RR
GOLD 1" MACHINE SCREW
(4 used for the KNOBS)
Insert a SLIDE CAM (FF) into the DRAWER SIDES (O and P).
Fasten the DRAWER SLIDES (Z and AA) to the DRAWER SIDES (O and P). Use four GOLD 5/16" FLAT HEAD SCREWS (XX)
through holes #1 and #3.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identification.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Fasten a KNOB (MM) to the DRAWER FRONT (L). Use a GOLD 1" MACHINE SCREW (RR).
Repeat this step for the remaining drawers.
Page 22
Roller end
FF
1
O
L
www.sauder.com/services
Screw head - turn CAM to
line up holes in SLIDES with
holes in DRAWER SIDES.
FF
P
2
3
GOLD 5/16" FLAT HEAD SCREW
(16 used for the SLIDES)
Roller end
1
Z
XX
412301
Publicidad
