Bosch Readyy'y BBH2 Serie Instrucciones De Uso página 27

en
Fold out the picture pages!
Before using for the first time
Fig.
Carefully place the handle onto the main housing and
screw it into place.
2
Fig.
Plug the hand-held vacuum cleaner into the floor tool
and lock it into place.
To release the floor tool, press the release button
and pull the hand-held vacuum cleaner out of the
tool.
Charging
!
Caution: Before using the vacuum cleaner for the
first time, the batteries must be charged for at
least 16 hours.
3
Fig.
To charge the vacuum cleaner, place it close to a
socket. The appliance can be left standing
anywhere in the room. (see Fig. 6)
Plug the charging cable into the connection at the
rear of the appliance.
Plug the charging cable plug into the socket.
The charging indicator lights up red during the
charging process.
Once the battery is fully charged, the charging
indicator lights up blue.
It is normal for the charging cable and hand-held
vacuum cleaner to become hot and this is not a
cause for concern.
Using the hand-held vacuum cleaner
Vacuuming
4
Fig.
Actuate the sliding switch in the direction of the
arrow.
26
All manuals and user guides at all-guides.com
Controlling the suction level
Fig.
Slide the sliding switch into the required position in
order to set the suction power:
Fig.
!
Using the hand-held cordless vacuum
cleaner
Fig.
Crevice nozzle
For vacuuming crevices and corners, etc.
Fig.
Charging the hand-held cordless
vacuum cleaner
Fig.
After using the appliance
Fig.
5
Position 1 = medium power setting for simple
cleaning tasks
=> The appliance has a longer run time.
Position 2 = high power setting for difficult cleaning
tasks
=> The appliance has more power for a shorter run
time.
6
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this,
tilt the vacuum cleaner forwards slightly in the
direction of the nozzle.
Caution: When the appliance is left standing, it
must be switched off because, if the brush is
turning while the appliance is standing still, it could
cause damage to the floor covering.
7
Unlock the hand-held cordless vacuum cleaner by
pressing the release button and remove it from the
hand-held vacuum cleaner.
8
Insert the crevice nozzle into the air intake opening
of the hand-held cordless vacuum cleaner, as
illustrated.
9
To charge the hand-held cordless vacuum cleaner,
insert it into the hand-held vacuum cleaner and lock
into place. Make sure that it is seated correctly.
10
Switch off the appliance after vacuuming.