FireClass FC410MIO Manual De Instrucciones página 5

FireClass
 STYLE B - Monitor multiple normally open
contacts with a short on the zone giving an
alarm.

STYLE C - Monitor a single normally open or
normally closed contact with a short or open
on the zone, giving a fault.
Features
The FC410MIO monitoring and control features
include the following configurable items.

Addressable functionality.

Monitoring three Class B circuits either
normally open or normally closed contacts.
 The status of the identified monitored
contact signals to the Fire Controller.
 The status of the wiring to the relay contacts.
 The LED lights when a contact, on any of
three monitored zones, has switched to the
active (off normal) state.
 The LED when normally off, will pulse when
the FC410MIO is polled by the controller.
Fig. 1: FC410MIO Small addressable multi-I/O
module
Fixing Instructions Doc. version 6.0
PORTA DI PROGRAMMAZIONE
PROGRAMMING PORT
ANSCHLUSSBUCHSEN FÜR
HANDPROGRAMMIERGERÄT FC490ST
HVR800-Treiber
HVR800-Drivers
Fig. 2: FC410MIO PCB Layout
CENTRALE FC
FC CONTROLLER
FC
L1
LEFT
L1
Ringleitung
PORTA DI PROGRAMMAZIONE
PROGRAMMING PORT
HVR800-Treiber
HVR800-Drivers
Fig. 3: SPUR circuits (Class B) Normally Open Con-
tacts, Short Circuit = Fault.
Note:
1 All SPUR inputs must be terminated with a
330 ohm EOL resistor.
2 FireClass console or FireClass Express confi-
guration selection - Style C (Normally Open).
3 One contact for each SPUR circuit.
Notes:
1 For connection of HVR800s, refer to
document HVR800 High Voltage Relay
Module "Installation Instructions" 17A-03-
HVR, Issue 3 or later, or 120.415.528, Issue 5
or later.
INGRESSI SPUR
SPUR INPUTS
FC410MIO
INGRESSI SPUR
SPUR INPUTS
EINGÄNGE
STICHLEITUNGEN
FC410MIO
FC410MIO
5/16