Axis Ip Utility - Single Camera/Small Installation - Axis Communications 233D Manual De Instrucciones

Page 12

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 233D.
Automatic discovery
1. Check that the AXIS 233D is connected to the network and that power has been
applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 14 for instructions on how to assign the password.
Assign the IP address manually
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button
serial number and IP address for the AXIS 233D. The serial number is located on the
product label.
3. Click the Assign button and follow the instructions.
4. Click the Home Page button to access the camera's web pages.
5. See page 14 for instructions on how to set the password.
All manuals and user guides at all-guides.com
Assign new IP address using serial number and enter the
AXIS 233D Installation Guide