• If there is noise from radio or other source while using the
shaver, move to a different location to use the shaver.
Charging with the charging stand
1. Insert the appliance plug into the
charging stand.
2. Place the shaver on the charging
stand.
3. Plug in the adaptor into a
household outlet.
Using the shaver
1
1
Press
and shave.
• The power cannot be turned on when
the switch lock lamp (
power switch is locked.
Press the power switch for more than
2 seconds to unlock. (See pages 15
and 16.)
14
3
2
1
) blinks, as the
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver
over the face against the grain of the
beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
• To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
You can also use a pen grip to hold
the shaver.
2
2
Press
when finished.
When the battery capacity is low
The charge status lamp (
every second when operating the shaver.
• You can shave 2 to 3 times after the charge
status lamp (
) blinks. (This will differ
depending on usage.)
) blinks once