FF Europe EXBK01 Manual Del Usuario página 28

STEP 3
1. Slide the handlebar support pole (9) into the main frame (1), to lock in place by M8
small knob (14) and M16 plum blossom knob (15).
2. Fix the handlebar (7) to the handlebar support pole (9) with the Allen bolts (10) and
the spring washers (11) – see the illustration.
STEP 4
1. Fix the Computer bracket (12) provided to the handlebar (7) with one tapping screw
(13).
2. Insert the computer bracket (12) into the flute on the back of the Computer (6). Then
remember to load the 2AA batteries, and insert the handlebar wire into "PULSE INPUT"
hole, and insert the sensor wire from the main frame into "SENSOR INPUT" hole on the
back of the computer – see the illustration.
EN
28