Ceasa NASSER LCD HF UF WBP 160 Manual De Instrucciones página 61

Regeneration: Adjustment of cycle times
The times of regeneration cycles have been pre-programmed by the manufacturer of softener. However, you can
modify the advanced programming mode as follows.
Setting the first cycle (Backwash)
From the previous state, press the DOWN key until the program 2, which is the length of backwash is displayed.
Press the "Validation" for adjusting the first cycle key. With the help of the UP and DOWN keys set the duration
of the backwash of the softener. (According to the
Press "Validation" to confirm.
Setting the second cycle (Brine and slow rinse)
Press DOWN for adjusting the second cycle. The indicator light will mark the program 3, which corresponds to
the time of "brine and slow rinse".
Press the "Validation" for adjusting the second cycle key. With the help of the UP and DOWN keys indicate time
of brine and slow rinse (According to the
Press "Validation" to confirm.
Setting the third cycle (Brine refill)
Press DOWN for adjusting the third cycle. The indicator light will mark the program 4, which corresponds to
the time of "Brine refill".
Using the "Validation" button, and with the help of the UP and DOWN keys select the loading time of brine
refill. (According to the Annex
Press "Validation" to confirm.
Adjusting the fourth cycle (Fast rinse)
Press DOWN for adjusting the fourth cycle. The indicator light will mark the program 5, which corresponds to
the minutes of "Fast rinse".
Using the "Validation" button, and with the help of the UP and DOWN keys dial the fast rinse. (According to the
Annex II).
Press "Validation" to confirm.
Days between regenerations H-
We press the DOWN key and appears H- (days between regenerations)
All manuals and user guides at all-guides.com
Annex II).
Annex II).
II).
61 NASSER - CEASA