Ceasa NASSER LCD HF UF WBP 160 Manual De Instrucciones página 62

These are days that will be a regeneration of maintenance in case of no water consumption after the days we
have programmed.
Using the "Validation" button, and with the help of the UP and DOWN keys select the days you want, from 00 to
40. The default is always 30 days.
Press "Validation" to confirm.
External signal mode
Finally, when you press the key DOWN, we appear b-01 (mode external signal)
This position has two varieties:
b-01 - To exit programming auxiliary pump / solenoid additional connection during washing.
Useful in installations with insufficient pressure or external bypass controller (requires additional hardware)
b-02 - For programming additional auxiliary output for solenoid connection depressurization during the
repositioning of the ceramic disk.
Useful in large and high pressure equipment. It requires additional items.
Using the "Validation" button, and with the help of the UP and DOWN keys select the desired option by default
is always in b-01. Press "Validation" to confirm.
To complete the process again just press the DOWN key.
The current time. Press "Regeneration" key to exit the program and return to the screen of Service
Parameter settings (only to modify in Factory or by the Official Agent Tech.
Service)
62 NASSER
All manuals and user guides at all-guides.com
- CEASA