Connections And Controls; Using The Device - Dometic GROUP Waeco PerfectCharge CA360 Instrucciones De Uso

All manuals and user guides at all-guides.com
Perfect Charge CA 360
4.1

Connections and controls

No. in
fig. 1, page 3
1
No. in
fig. 2, page 3
1
5

Using the device

➤ Switch off all electric consumers which are connected to the battery.
➤ Connect the battery charger to the mains.
✓ Depending on the charging condition of the battery, the battery charger
starts charging or supplies a retention voltage.
✓ The "Status" LED (fig. 1 1, page 3) displays the operating status (see
following table).
Display
Orange, quickly flashing
Orange, slowly flashing
Orange, constantly lit
Green, constantly lit
Green, slowly flashing
Red, constantly lit
Red, quickly flashing
Red, slowly flashing
NOTE
I
In the event of a fault (the Status LED is red), refer to "Trouble-
shooting" on page 25).
EN
Explanation/function
Status LED
Explanation/function
Fan
Meaning
Phase 1
Phase 2
Phase 3
Phase 4
Phase 5
Short circuit or defective fuse
Battery or battery charger is overheating
Battery undervoltage or overload
Using the device
23