Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The CD-BT1MKII has a 5-band equal-
izer for bass guitar input and two EQ
slots (A and B) for the equalizer.
After an EQ slot is selected and you edit
the equalizer settings, the edited EQ
settings will automatically be stored in
the selected EQ slot.
Setting the equalizer
1. Tap the
EQ/EDIT
key to select ei-
ther EQ slot A or B (pressing the
EQ/EDIT
key cycles through EQ
slot A, B, and OFF).
2. Press and hold the
EQ/EDIT
to enter the
EQ
menu.
All manuals and user guides at all-guides.com
3. Select a parameter from the choic-
es below by pressing either the
PREV
or
NEXT
(Lo : 80 Hz)
EQ L
(Lo-Mid : 200 Hz)
EQLM
(Mid : 500 Hz)
EQ M
(Hi-Mid : 1.25 kHz)
EQHM
(Treble : 3.15 kHz)
EQ H
Mid Shape (EQ adjust
MID
ment) ON/OFF
4. When the selected parameter ap-
pears on the display, use either the
or
UP
DOWN
key
level of gain. The available range
of values for adjustment is be-
tween -15 – +15.
5. Press the
TIME/ESC
the
EQ
menu and return to the
home display mode. The param-
eters set in the
tomatically saved in the EQ slot
selected in step 1.
Recalling equalizer settings
Press the
key:
slot you want to recall.
TIP
If you have connected a footswitch such as
TASCAM RC-30P (sold separately), you can
step through the bank slots by pressing the
footswitch. Make sure that FOOT in the Setup
menu is set to EQ+.
key to adjust the
key to exit
EQ
menu are au-

Equalizer

EQ/EDIT
key to select the EQ
TASCAM CD-BT1MKII —
21

Publicidad

Tabla de contenido
loading

Tabla de contenido