Kohler K-18486 Guia De Instalacion página 12

Bath Deck
5-29/32"
(15 cm) ± 0
Screw
Support
Plate
Water Supply Tubing
6. Prepare the Site - Deck-Mount Installation
NOTE: Provide an access panel under the bath deck for water
supply connections.
NOTE: Reference the "Roughing-In - Deck-Mount Installation"
section of this guide before proceeding.
Place the support plate onto the bath deck where the water
supply tubing will be located.
Trace the holes of the support plate at this location to set the
centerline distances for the water supply tubing.
Verify the location of the support plate will allow the spout of the
bath filler to reach over the bath deck and into the bath.
Verify the distance between the centerline of the holes on the
support plate will be 5-29/32" (15 cm) ± 0.
NOTE: If a hole saw will be used to drill the holes, drill outside the
line of the marked holes.
Drill the marked holes on the bath deck using a 1-9/16" spade
drill bit or 1-1/2" hole saw. Remove any debris from the drilling
process.
1054455-2-B
All manuals and user guides at all-guides.com
Plastic Pipe
Plug
Nut
Washer
Tube
Male Copper
Coupling
Connection
Assembly
12"
(30.5 cm)
Washer
Nut
12 Kohler Co.