Publicidad
All manuals and user guides at all-guides.com
G E T T O K N O W Y O U R F L I R F X
1.
2.
1
2
3
4
3.
4.
8
5
9
6
10
7
5.
Lens Cover: Keep the lens cover
8.
Adjustment Ring: Loosen to adjust
clean using a slightly damp cloth.
the horizontal position of the camera.
Don't use chemical cleaners as
9.
Vertical Adjustment Screw: Loosen
they may damage the lens cover.
to adjust the vertical position of the
6.
Microphone: Record sound and
camera.
communicate.
10. Sunshade: Protects your camera from
7.
Speaker: Communicate via 2-way
sun glare. To remove, straighten the
intercom.
camera arm and slide the sunshade
backwards.
11
13
12
11. QR Code: Scan during setup using the
14. Mounting Holes: Mount the camera to
FLIR FX app.
the wall or ceiling.
12. Twist Adjustment Screw: Loosen to
15. Power Cable: Run the power cable
twist the camera head around the
through the cable notch on the stand
stand.
or through the wall.
13. Temperature Sensor.
CAUTION: Make sure the power connector
and power outlets are protected from the
elements when installing.
S M A R T Z O N E ™
SmartZone allows you to receive alerts when motion is detected in high priority areas.
To configure a SmartZone:
Navigate to the Settings
1
menu in the app.
Tap the
2
Motion sensitivity
icon, then tap the
grid
icon to view the
grid overlay.
Tap and drag inside
3
the grid to define your
SmartZone. Activated
areas will turn blue.
Tap Save.
4
R A P I D R E C A P ™
See the day in a minute by watching cloud-recorded events simultaneously.
To order a RapidRecap:
Tap the Actions
1
button and then tap
RapidRecap.
Note: Motion recording must be activated before you can order a RapidRecap.
Latch: Lock or unlock camera
inside mount. Both latches
must be firmly locked to ensure
weatherproof rating of the mount.
Camera: You can remove the
camera to use on its own or with
one of the other accessories. See
FLIR.COM/FX for instructions.
Accessory Connector: Slide
the camera all the way right to
remove it from the mount or all
the way left to connect it.
Outdoor Night Vision LEDs: See
further in the dark.
14
15
Select the start and
2
end time for your
RapidRecap.
•
Select the day
at the top of the
screen
•
Tap and drag on the
start and end time
to select a range
Press Create to
3
confirm the time
range and order
the recap.
Publicidad
