Frequency Band
ETSI
SNA-R41-A-BT4-xx: TTL
865 - 868 MHz
SNA-R42-A-BT4-5AB: RS232
SNA-R43-A-BT4-7AB: RS485
SNA-W43-A-BT4-7OS: OSDP™ v1 & v2
SNA-W42-A/BT4-5AX: SSCP
SNA-W43-A/BT4-7AX: SSCP
FCC
SNA-R51-A-BT4-xx: TTL
902 - 928 MHz
SNA-R52-A-BT4-5AB: RS232
SNA-R53-A-BT4-7AB: RS485
SNA-W53-A-BT4-7OS: OSDP™ v1 & v2
SNA-W52-A/BT4-5AX: SSCP
SNA-W53-A/BT4-7AX: SSCP
Peru
SNA-R51-A-U04-xx1PE: TTL
916 - 928 MHz
SNA-R52-A-U04-5AB1PE: RS232
SNA-R53-A-U04-7AB1PE: RS485
SNA-W53-A-U04-7OS1PE: OSDP™ v1 & v2
SNA-W52-A/BT4-5AX1PE: SSCP
SNA-W53-A/BT4-7AX1PE: SSCP
New-Zealand
SNA-R51-A-BT4-xx1NZ: TTL
922 - 928 MHz
SNA-R52-A-BT4-5AB1NZ: RS232
SNA-R53-A-BT4-7AB1NZ: RS485
SNA-W53-A-BT4-7OS1NZ: OSDP™ v1 & v2
SNA-W52-A/BT4-5AX1NZ: SSCP
SNA-W53-A/BT4-7AX1NZ: SSCP
Use an DC power supply ES1, PS1 (as per IEC EN 62368-1) for main supply.
Main power supply:
Typical: 12 Vdc
Consumption:
Typical: 0.9A under +12 Vdc
Communication:
RS485 (L+ & L-) / RS232 (TD & RD) / TTL (Wiegand / Clock & Data)
Pin out:
Removable connectors 1x8 pins, thread 5.00mm/0.196 in
Temperature:
-22°F to +140°F
Protection:
IK10 certified Reader casing - IP65
Chip:
EPC1 Gen2 (ISO 18000-63) - 1 to 62 bytes max
I/O:
1 input / 1 output
Buzzer:
Can be activated / deactivated by software and Master jumper
Relay
2A; 24VDC
1 LED:
7 configurable colors (red, green, blue, orange, purple, turquoise, white)
Anti-intrusion:
Electromechanical switch + Infrared proximity sensor
RS485:
Use a multi-conductor shielded twisted pair cable. Max length 3 280 ft / 1000 m at 9600 baud.
RS232:
Max length 49.21 ft / 15 m.
Wiegand / Clock & Data: Use a multi-conductor shielded untwisted
2 cable AWG24 – 30 m / 98.4 ft max
2 cable AWG20 – 50 m / 164. ft max
▪ Install the reader away from computer transmission cables or from power sources (ex: RJ45, sector...).
The disruptions that they can cause can vary according to their radiation power and their proximity.
▪ Use a filtered and regulated power supply.
▪ Users must not remain within a range of less than, 34 cm / 13.39 in from an antenna for an extended period of time as per EN50364 applicable to this type
of device.
▪ Before any service operation you must de-energize reader.
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1149X01 - Page 1 sur 12 - Ed. 06/01/2022
SPECTRE nano
UHF & Bluetooth
reader
®
Installation procedure
References
v1 & v2- RS232
®
v1 & v2- RS485
®
v1 & v2- RS232
®
v1 & v2- RS485
®
v1 & v2- RS232
®
v1 & v2- RS485
®
v1 & v2- RS232
®
v1 & v2- RS485
®
Range: +10 Vdc up to +36 Vdc (indoor use)
Max: 1.25A under +12 Vdc
SPECTRE nano
Lecteur UHF & Bluetooth
®
Notice d'installation
Frequency Band
Morocco
865.7 MHz
Philippines
918 - 920 MHz
Australia
920 - 926 MHz
Power Supply Characteristics
Characteristics
Recommended Cables
4 cables AWG24 – 60 m / 196.9 ft max
4 cables AWG20 – 100 m / 328.1 ft max
Recommendations
Dimensions (mm/in)
SPECTRE nano
Lector UHF y Bluetooth
®
Manual de instalación
References
SNA-R41-A-BT4-xx1M: TTL
SNA-R42-A-BT4-5AB1M: RS232
SNA-R43-A-BT4-7AB1M: RS485
SNA-W43-A-BT4-7OS1M: OSDP™ v1 & v2
SNA-W42-A/BT4-5AX1M: SSCP
SNA-W43-A/BT4-7AX1M: SSCP
SNA-R51-A-U04-xx1PH: TTL
SNA-R52-A-U04-5AB1PH: RS232
SNA-R53-A-U04-7AB1PH: RS485
SNA-W53-A-U04-7OS1PH: OSDP™ v1 & v2
SNA-W52-A/BT4-5AX1PH: SSCP
SNA-W53-A/BT4-7AX1PH: SSCP
SNA-R51-A-BT4-xx1AU: TTL
SNA-R52-A-BT4-5AB1AU: RS232
SNA-R53-A-BT4-7AB1AU: RS485
SNA-W53-A-BT4-7OS1AU: OSDP™ v1 & v2
SNA-W52-A/BT4-5AX1AU: SSCP
SNA-W53-A/BT4-7AX1AU: SSCP
Range: +10 Vdc up to +30 Vdc (outdoor use)
6 cables AWG24 – 100 m / 328.1 ft max
US
FR
ES
v1 & v2- RS232
®
v1 & v2- RS485
®
v1 & v2- RS232
®
v1 & v2- RS485
®
v1 & v2- RS232
®
v1 & v2- RS485
®