Hot grease may drip from the fuel
compartment during use . Keep an adequate
distance, as severe burns may result .
Always wear barbecue gloves or
oven mitts . Gloves should accord
with PPE regulation (category II heat
protection, e .g . DIN EN 407) .
Always use barbecue tools with long, heat
resistant handles .
Pouring flammable liquids into embers will
cause spurts of flames or explosions . Never
use lighter fluid such as petrol or spirits . Do
not add charcoal soaked in lighter fluid to the
fire .
Remain alert at all times always be aware of
what you are doing . Do not use the product
if you are unfocused or tired or under the
influence of drugs, alcohol or medications .
One moment of carelessness whilst using the
product can cause serious injuries . Do not
leave the product unattended .
Prevent fires
WARNING! This barbecue will become
m
very hot, do not move it during operation .
Keep a fire extinguisher and a First Aid kit
handy to be prepared in the event of an
accident or fire .
Install the barbecue on a secure level base
prior to use .
Set the product at least 1 m from highly
flammable materials .
Fill the product with max . 1 .6 kg of charcoal .
Only light the charcoal in an area protected
from the wind .
Ensure the charcoal has completely burnt out
and cooled down before removing the ashes .
Do not install the product in caravans or on
boats .
20 GB/MT
Avoid the danger of
damage to property
The screw joints can gradually loosen from
use and affect the stability of the product .
Verify the screws are tight before every use .
If necessary, tighten all screws to ensure
stability .
Do not use force when assembling the
product .
Do not overtighten the screws .
Do not sit or stand on the product .
Do not use the product if parts are missing,
damaged or worn .
Do not use the barbecue in a confined and/or
habitable space e .g . houses, tents, caravans,
motor homes, boats . Danger of carbon
monoxide poisoning fatality .
Assembly (see Fig. B – J)
CAUTION! The screw heads must always
m
face outwards to guarantee your safety, as
otherwise there is a risk of injury .
Note: Tighten all screws securely after assembly
to prevent undesirable material stresses . When
doing so, secure the nuts using the appropriate
spanner .