Publicidad
Idiomas disponibles
Idiomas disponibles
EN
AC Power
Power Linking
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Master/Slave
Connection
All manuals and user guides at all-guides.com
This product has an auto-ranging power supply that can work with an input
voltage range of 100-240 VAC, 50/60 Hz.
You can link up to 9 Ovation™ C-640FC products at 120 VAC or
18 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
Green/Yellow
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Ovation™ C-640FC will work with a DMX controller using a regular
DMX
serial
connection.
www.chauvetpro.com.
The Ovation™ C-640FC uses a regular DMX data connection for its DMX
personalities: TOUR, TR16, ARC.1, AR1.D, ARC.2, ARC.3, AR3.D, AR3.S,
PIX1, PIX3, PX16,and HSV. See the User Manual to connect and configure
for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
personality, be sure that the dimming curve in SET > DIMX is set to OFF.
The Ovation™ C-640FC uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Ovation™ C-640FC QRG
Wire (U.S.)
Wire (Europe)
Black
Brown
White
Blue
Green/Yellow
A
DMX
Primer
3
Screw Color
Yellow/Brass
Silver
Green
is
available
from
Publicidad
