Intended Use; Safety Informations - BGS technic 8724 Manual De Instrucciones

Engine Timing Tool Set for BMW N47 / N47S
TOOLS
1 Crankshaft rotating tool,
to be used as OEM 116480
2 Socket
3 Crankshaft locking pin,
to be used as OEM 115320
4 Camshaft locking tool,
to be used as OEM 118760
5 Chain sprocket support sleeve,
to be used as OEM
118740 / 118741 / 118742

INTENDED USE

This tool set is used for setting and checking the engine timing.
The included tools are suitable for BMW engines N47, N47S, N57, N57S,
built in e.g. following models:
•
116d 118d 120d 123d, type E81 E82 E87 E88 F20
•
316d 318d 320d 325d 330d type E90 E91 E92 E93 F30
•
520d 525d 530d 530d GT 535d 535d GT M550d, type E60 E61 F07 F10 F11
•
640d type F12
•
730d 740d 750d, type F01
•
X1 1.8d 2.0d 2.3d, type E84
•
X3 1.8d 2.0d 3.0d, 3.5d type E83 F25
•
X5 3.0d 4.0d M5.0d, type E70
•
X6 3.0d 4.0d M5.0d, type E71
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8724
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed