Troubleshooting - Logic3 Valve80 Manual Del Usuario

Trouble Shooting
Problem
Valve80 does not turn ON
No sound
Cradle will not fix into the Valve80
I have lost a part for the Valve80
Remote Control is not working
No Picture
For Spares/ Prices visit our website at www.logic3.com
Should you have any setup problems with the Valve80 with Speakers (MIP004) please contact our Technical
Support Hotline on +44 (01923) 471 000 – National/International call rates apply or Email
support@logic3.com
What Should I do?
Check the AC Power Cable is connected firmly into the Valve80 and into the AC wall
outlet and switched ON
Ensure the Valve80 Power Switch is turned ON
Check the Fuse at the back of the Valve80 (Fuse Compartment) - Make sure the
unit is UNPLUGGED
Ensure the correct cradle is used with your iPod.
Ensure the correct Input is selected.
Check the play status on the iPod.
Please try updating the software for your iPod using the latest iTunes which is
available from www.apple.com/ipod/download
Check the MUTE function is not ON by pressing the MUTE on the remote control –
LED on the Valve80 will be ON if MUTE is in OFF position
Check the Speakers are connected correctly
Remove any inserted cradles
Please refer to the spare parts listed on our website – www.logic3.com
Replace Battery.
Check the Battery is inserted correctly
Check your Composite/S-Video connector is connected correclty.
Check your iPod is set to TV out (refer to your iPod manual for settings)
- Spare parts are available for some models at our website www.logic3.com