Listening Through A Receiver; Troubleshooting For Anynet - Samsung 6 Serie Manual Del Usuario

Advanced Features

Listening through a Receiver

¦
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
OUT (OPTICAL) jack of the TV.
✎
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV's Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
NOTE
x
You can only control Anynet
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet
x
The Anynet + functions do not operate with other manufacturers' products.
¦

Troubleshooting for Anynet

Problem Possible Solution
Anynet does not work.
+
I want to start Anynet .
+
I want to exit Anynet + .
The message "Connecting to
Anynet device..." appears on the
+
screen.
The Anynet device does not play.
+
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
38
English
All manuals and user guides at all-guides.com
devices using the TV remote control, not the buttons on the TV.
+
+
• Check if the device is an Anynet device. The Anynet+ system supports Anynet
+
• Connect only one receiver (home theatre).
• Check if the Anynet device power cord is properly connected.
+
• Check the Anynet device's Video/Audio/HDMI Cable connections.
+
• Check whether Anynet + (HDMI-CEC) is set to On in the Anynet
• Check whether the TV remote control is in TV mode.
• Check whether it is Anynet exclusive remote control.
+
• Anynet does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
+
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet Function of Anynet+ device is set on.
+
• Check if the Anynet device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On
+
in the Anynet Setup menu.
+
• Press the TOOLS button to display the Anynet
• Select View TV in the Anynet + menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet
• Press P >/<, PRE-CH, and FAV.CH
when a tuner-embedded Anynet+ device is not connected.)
• You cannot use the remote control when you are configuring Anynet
• Use the remote control when the Anynet
• You cannot use the play function when
• Check whether or not the device supports Anynet
• Check whether or not the HDMI Cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet
• Search Anynet devices again.
+
• You can connect an Anynet device using the HDMI Cable only. Some HDMI cables may not support Anynet
+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
• Connect the optical cable between TV and the receiver.
+ setup menu.
menu and select a menu you want.
+
to change the TV mode. (Note that the channel button operates only
or switching to a view mode.
+
setting or switching to view mode is complete.
+
Plug & Play (Initial setup) is in progress.
+ functions.
setup menu.
+
DIGITAL AUDIO
device.
+
devices only.
+
devices.
+
+