Silverline 261123 Manual De Instrucciones página 8

261123
• Always hold the saw securely, keep your left arm as straight as is practical
when cutting.
• A properly functioning chain brake is important for preventing injury in the
event of kickback. Always test the chain brake before use (see above).
Maintenance
• Always disconnect the machine from the mains power supply before
performing any cleaning or maintenance.
Blade maintenance
• After every use, ensure that all waste material is removed from the blade.
• If cutting speed is reduced, or of cutting produces powder rather than wood
chips, the blade is probably blunt. The blade should be regularly sharpened
using an appropriately sized chainsaw file.
• To maximise the service life, periodically turn the guide bar over when
refitting.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause internal parts
This Silverline product comes with a 3 year
guarantee.
To qualify you must register this product at silverlinetools.com within
30 days of purchase. The guarantee period begins on the date of
purchase as detailed on your sales receipt.
Should you NOT wish to register this Silverline product a standard 1
year guarantee will apply.
This Guarantee and guarantee period becomes effective at the date
of retail purchase as detailed on your sales receipt.
PLEASE KEEP YOUR SALES RECIEPT
If this product develops a fault within 30 days of purchase, return it to
the stockist where it was purchased, with your receipt, stating details
of the fault. You will receive a replacement or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase
date, your name, address and place of purchase before any work
can be carried out.
You must provide precise details of the fault requiring correction.
All claims will be verified by Silverline Tools that the deficiencies are
of a material or manufacturing fault within the guarantee period.
We do not refund carriage. All products should be in a suitably clean
and safe state for repair, and should be packaged carefully to prevent
damage or injury during transportation. We may reject unsuitable or
unsafe deliveries.
All work will be carried out by Silverline Tools or its authorised repair
agents.
The repair or replacement of the product will not extend the period
of guarantee.
Defects recognised by us as being covered by the guarantee shall
be corrected by means of repair of the tool free of charge (excluding
carriage charges) or by replacement with a tool in perfect
working order.
Retained tools, or parts, for which a replacement has been issued,
will become the property of Silverline Tools.
All manuals and user guides at all-guides.com
Silverline Tools Guarantee
Terms & Conditions
1600W Electric Chainsaw
to wear quickly, and shorten the machine's service life.
• The chain and cutting bar should be regularly removed to allow proper
cleaning of the chain oil feed ports.
• Clean the body of your machine with a soft brush, or dry cloth. If available,
use clean, dry, compressed air to blow through the ventilation holes.
• Over time the carbon brushes inside the motor may become worn.
Excessively worn brushes may cause; loss of power, intermittent failure,
or visible sparking.
• If you suspect that the brushes are worn, have them replaced at an
authorised service centre.
Disposal
• Do not dispose of power tools, or other waste electrical and electronic
equipment, with household waste.
• Contact your local waste disposal authority for information on the proper
way to dispose of tools.
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee
Registration button. You will need to enter:-
• Your personal details
• Details of the product and purchase information
Once this information is entered your guarantee certificate will
be created in PDF format for you to print out and keep with your
purchase.
The repair or replacement of your product under guarantee provides
benefits which are additional to and do not affect your statutory
rights as a consumer.
What is covered:
The repair of the product, if it can be verified to the satisfaction of the
Silverline Tools that the deficiencies were due to faulty materials or
workmanship within the guarantee period of purchase.
If any part is no longer available or out of manufacture, Silverline
Tools will replace it with a functional replacement part.
Use of the product in the EU.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
Normal wear and tear caused by use in accordance with the
operating instructions eg blades, brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades,
sanding sheets, cutting discs and other related items.
Accidental damage, faults caused by negligent use or care, misuse,
neglect, careless operation or handling of the product.
Use of the product for anything other than normal
domestic purposes.
Change or modification of the product in any way.
Use of parts and accessories which are not Silverline Tools
genuine components.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools
or its authorised repair agents.
Claims other than the right to correction of faults on the tool named
in these guarantee conditions are not covered by the guarantee.
www.silverlinetools.com
7