Alesco A80 Manual Del Usuario página 3

POWER LINE
Important! The appliance may only be connected to sockets with proper earthing.
Important!It is required that A80 connects to a socket that has a RCD/GFI 30mA
protection switch.
Connect the A80 to the wall socket. The LEDs will indicate with green light when the A80 is
connected and ready for use.
See picture 5
10A setting
POWER
Pressing the power button change the power setting of the A80. The start position of the LEDs
corresponds to 10A. If your power line allows it, it's possible to increase the power up to 16A. It's
also possible to decrease the power if the work piece is of a thinner material. The power setting
will be reset when the supply plug is disconnected.
See picture 5
10A setting
USE
Warning! This machine is intended only for professional use and requires trained users.
Warning! The appliance must not be operated by children.
Warning! This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities.
Warning! Do not place the A80 on an uneven or unstable surface. The induction heater
could tip over and cause personal injury or serious damage to the equipment.
Warning! Do not touch any objects that have been in the vicinity of the induction tip
without checking that the object has cooled down.
Warning! Do not touch the inductor when it is activated because it emits a strong
magnetic field and heat. Risk of personal injury
Warning! Unless the paint or other chemicals has been removed before the work piece is
heated, use an extractor fan to remove fumes.
Warning! Wear no metal objects on your hands such as watches, jewellery, necklaces,
car keys etc. There is a risk of these also being heated during operation.
Warning! Anyone with a pacemaker or other technical medical equipment must never
use, or be in proximity to, an active induction heater.
Warning! When the induction heater is in use the worksite must be cleared of combustible
material to avoid it being ignited.
Warning! Ensure that there is fire-extinguishing equipment at hand. Risk of personal
injury.
Warning! Loose cables and hoses constitute a risk of tripping. Risk of personal injury.
Before starting to use your A80 make sure to put on protective gloves and glasses
See picture 4
Eye and gloves protection
When pressing the trigger switch the LEDs flashes white and the induction heater is working.
See picture 6
In use 16A setting
3