Descargar Imprimir esta página

Get Started - Silk’n Flash&Go LUX Instrucciones De Uso

Ocultar thumbs Ver también para Flash&Go LUX:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 70

9. Get Started!

1. Remove Silk'n Flash&Go™ HAIR REMOVAL UNIT and other components from box.
2. Verify that the DISPOSABLE LAMP CARTRIDGE is inserted properly at the tip of the device and that it is
not damaged.
3. Plug the ADAPTOR cord into the Silk'n Flash&Go™ HAIR REMOVAL UNIT socket.
4. Plug the ADAPTOR into an electrical outlet. The STAND BY INDICATOR LIGHT will turn on.
Your Silk'n Flash&Go™ is now ready to start.
Treat with Silk'n Flash&Go safely and properly!
Choose areas to treat that have not had recent exposure to the sun.
5. The skin of the treatment areas should be shaved, clean, dry and free of any powders, antiperspirants or
deodorants. Do not wax, pluck or tweeze the hair out. Shaving is an important step to get the results you want!
6. Press the ON/STBY SWITCH. The POWER ON INDICATOR LIGHT (orange) will turn on and a fan sound
(similar to the sound of a hairdryer) will start.
7. Approximately 3.5 seconds after pressing the ON/ STBY SWITCH, the READY INDICATOR LIGHT (green)
will turn on. The device is then ready for you to trigger the first pulse at the lowest energy level.
8. If this is your first treatment - Choose the energy level. Flash&Go offers 5 levels of energy from 1 (the lowest)
to 5 (the highest). To choose the right energy level for your first treatment, test each treatment area separately.
Place the TREATMENT SURFACE on the skin and press the trigger to deliver one pulse. If you did
not experience abnormal discomfort press the + button once and deliver one pulse on a different
spot at energy level 2.
Continue testing at increased energy levels until you have reached the highest level that you feel
comfortable with. If within one hour you experience no adverse effects, you can start your full
treatment at that energy level.
Repeat this test for each body part you intend to treat.
9. Set the energy level. If the energy level should be higher than the lowest, press the ENERGY LEVEL
SETTING BUTTONS using the "-" or "+" to respectively decrease or increase the energy level, until the
desired energy level is set and represented by 3 energy level indicator lights (For details see "Energy Level"
chapter inside this user manual).
10. Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly and smoothly. As soon
10
All manuals and user guides at all-guides.com

Publicidad

loading

Este manual también es adecuado para:

Flash&go flashFlash&go lux x