intensity TWIN STIM III Manual De Instrucciones página 13

8) Decreasing the output intensity of channel 2 [V]. Use to set
the application program and the parameter of the waveform in
the setting state and to unlock the current treatment program.
9) Parameter Selection: press the button to enter setting
state; you can select the different parameters in
conjunction with [A] and [V].
10) Press [.b} to turn ON. Press [9] button and hold for
approximately 3 seconds to turn off the device.
11) Belt Clip
12) The battery compartment cover
13) Adapter Receptacle
2~2 LCD display
1) Displays therapeutic mode.
2) Displays therapeutic program.
3) Displays Delay time for EMS or Displays the cycle time for
TENS in setting state.
4) Timer symbol.
5) EMS waveform of ramp up and ramp down time.
6) Display of waveform pulse width.
7) Displays channel 1.
8) Display of the output intensity for channel I (Cl-Il); Display of
waveform pulse width or EMS waveform of contraction
(working) time in setting state.
9) EMS waveform of contraction (working) time.
10) The device is locked indicator.
11) Display of waveform pulse rate.
All manuals and user guides at all-guides.com
13