General Considerations - Scheppach hms 2600ci Instrucciones De Montaje

Manufacturer:
Scheppach
Manufacturer of Woodworking Machines GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Valued customer,
We hope that you enjoy your new machine and wish you
every success in working with it.
Warning:
The manufacturer of these devices is not liable, under the
applicable Product Liability Act, for damages to this device
or by this device resulting from:
• improper handling,
• noncompliance with the operating instructions,
• repairs by a third, non-authorized party
• installation and replacement of non-original spare
parts,
• utilization, noncompliant with the regulations,
• failure of the electric equipment resulting from viola-
tion of the electric specifications and VDE (Association
of Electrotechnology) regulations 0100, DIN 57113 /
VDE 0113.
We advise you:
Before assembly and implementation, please read the op-
erating instructions in their entirety.
These operating instructions should make it easier for you
to get acquainted with your machine and to use it as in-
tended.
The operating instructions contain important indications
that will help you work professionally and efficiently with
the machine, at the same time avoiding risks, saving on re-
pair costs, decreasing downtime and increasing reliability
and lifespan of the machine.
In addition to the safety regulations provided in the operat-
ing instructions, you must observe the applicable regula-
tions of your country for the use of this machine.
You should keep the operating instructions near the ma-
chine. They are protected from dirt and moisture by a plas-
tic covering. These must be read and followed diligently
by any operator, before staring the work. Only those, who
have been instructed on the use and informed of all the
associated risks, should work on the machine. Minimum
age requirements should be observed.

General Considerations

• After unpacking, please check all of the parts for any
possible damages in transit. The feeder must be im-
mediately notified of any complaints. Late claims will
not be accepted.
• Check that the shipment is complete.
• Before use, familiarize yourself with the operating in-
structions.
• Please use only original parts as supplies, such as wear
and tear and replacement parts. You can obtain re-
placement parts from your specialized dealer.
• When ordering, please give our item number, as well as
the type and the year of manufacture of the device.
10 english
All manuals and user guides at all-guides.com
hms 2600ci
Scope of delivery
Planing machine hms 2600ci
Combined extraction outlet
Assembly supplies (supply bag)
Adjustable planer fence
Operating instructions
Technical Specs
Dimensions L x W x H
1160 x 690 x 720 (1060)
mm (dimensions with
baseframe in brackets)
Table Height mm
Work Table L x W mm
Thicknessing Table
L x W mm
Weight kg
Planer schaft
Planer shafts ø mm
Knife range ø mm
Material of shaft
Speed max. 1/min
Number of blades
Dimension of blades
mm
Blade reshar size mm
Material of blades mm
Feeder
No. of feeder cylinders
Surface
Feeder cylinders ø mm
Length mm
Feeding speed m/min.
detachable
Motor
380–420/50
Motor V/Hz
Receiving capacity
2400
P1 W
Delivering capacity
1800
P2 W
2800
Speed 1/min
S6/40 %
Operation mode
Work data
Planer work width
max. mm
Chip work thickness
max. mm
Planer thickness width
max. mm
Chip thickness max.mm
Aperture thickness
min/max. mm
Angle
Stopper length mm
Stopper height mm
Subject to technical changes!
Planer shaft guard
540
each 500 x 310
590 x 250
135
59
61
C45
6500
2
3 x 18 x 260
15
HSS Nr. 3343
2
gummed
35,5
307
5,0
no
220–240/50
2340
1750
2800
S6/40 %
260
3
250
5
5/210
90–45°
900
150